
AKG BLUE LINE SERIES MODULAR MICROPHONES
Impeccable performance and extraordinary flexibility set a
higher standard for moderately priced modular condenser
systems. Building on the foundation of AKG's
reference-standard C 451 system, the AKG Blue Line elevates
the state-of-the-art by offering higher sensitivity, lower noise,
better phase and frequency response linearity, and lower
distortion. At the heart of each AKG Blue Line capsule is an
active transducer incorporating an ultra-low mass,
gold-sputtered diaphragm element. Innovative design and
precision manufacturing techniques result in a transducer
offering extraordinarily flat response, balanced directional
characteristics, minimal sensitivity to handling noise, and
virtual immunity to electrically induced noise. AKG Blue Line's
HDSMD (High Density Surface Mount Device) electronics are
lighter, more compact, and more reliable than conventional
circuit designs. The universal SE 300 B powering and output
module features a switchable 12 dB/octave bass cut filter at 75
Hz to cut rumble, and a switchable 10 dB pad for very high SPL
applications. Transformerless output electronics preserve the
fidelity of the capsules across the full audio bandwidth with
extremely low LF distortion. The AKG Blue Line System is also
uncommonly easy to use, thanks to the bayonet coupling.
Tactile and visual guides allow fast, accurate assembly even
under difficult field conditions with no possibility of
cross-threading. The bayonet system also features
self-cleaning contacts to maintain a clean signal, even after
years of outdoor use in hostile environments.
AKG Blue Line SE 300 B Transformerless Powering/Output
Module is for use with all AKG Blue Line modular capsules, the
SE 300 B operates from any 952 V phantom power supply.
Incorporates three position switch offering linear response, 10
dB preattenuation and 12 dB/octave 75 Hz bass-cut filter. Stand
adapter included.
CK 91 provides a flat frequency response and uniform polar pattern of the
CK
91 make it ideal for general applications where suppression of
off-axis sound is desired. Includes foam windscreen.
CK 91 Polar pattern: cardioid
Frequency range: 2020,000
Hz
Sensitivity: 10 mV/Pa (-40
dBV)
Max. SPL for 1 % THD: 132
dB / 142 dB
Equivalent noise level: 17
dB-A
Signal/noise ratio (A weighted):
77 dB
Preattenuation pad: -10 dB,
switchable
Bass cut filter: 12 dB/octave
at 75 Hz
Electrical impedance: 200
ohm
Recommended load impedance:
>1,000 ohm
Power requirement: 9 to 52
V phantom power to DIN 45596
Current consumption: <2
mA
Connector: bayonet mount
Cable length: -
Finish: dark gray
Size: dia.: 19 mm (0.7 in.);
length: 52 mm (2 in.)
Net/Shipping weight: 35/200
g (1.2/7.1 oz.)
Standard accessory: W 90
Optional accessory: W 95
Note: Short Shotgun is available to work
with the 300 Body. Cost: $360
Email
for more info on this products availability.
Combo Retail Price: $462
MicSupply
Price: $404

|