The Dcode® PS-1A is a low noise, phantom 48 volt microphone power supply. The PS-1A works with one 9 volt battery and has enough power to run high current microphones. The small size, light-weight, rugged construction and very low noise make the PS-1A a natural for powering microphones feeding DAT machines, radio mics, tape machines, and mixing panels. Long battery life and a bright LED low battery indicator ensure that the microphone is properly powered during  your  recording session.

$135

---

Denecke PS-2

Dual channel version of the 48v Phantom Microphone Power Supply. No pad switch. 

The Dcode® PS-2 is a low noise, phantom 48 volt microphone power supply. Runs on one 9 volt battery and has enough power to run high current microphones. The small size, light-weight, rugged construction and very low noise make the PS-2 a natural for powering microphones feeding DAT machines, radio mics, tape machines, and mixing panels. Long battery life and a bright LED low battery indicator ensure that the microphone is properly powered during  your  recording session.

$150

External Power Supply for the PS-1 and PS-2

---

Denecke PS-T

The Dcode® PS-T is a low noise T-Power 12 volt microphone power supply.   Runs on one 9 volt battery and has enough power to run high current microphones.   Small, rugged, light-weight, and low noise make the PS-T perfect for powering microphones feeding DAT machines, radio mics, tape machines and mixing panels.

FEATURES
 Low Noise!  Equipped with well regulated electronics and precision resistors to satisfy the most demanding Digial requirements.

 Automatic Power on and off when the mic is plugged and unplugged.

 LED Blinks at turn on and turn off.

 Low Battery indicator.

 Simple Quick Change drop in battery compartment.

 Reverse battery protection.

  Internal -15 dB pad and normal or red dot powering swiches.
 

SPECS

                                                                 Size: 1.25" x 3.0" x 4.0"

                                                                   Weight: 8 oz
 

                                                                   uses a standard 9 volt battery.

                                                                   voltage from 6.4 to 18 volts.

                                                                   Battery life approximately 24 hours (depending on mic load).

                                                                   Voltage is 12 vols + 2 volts

                                                                   Current: 0.05 mA to 33 mA (direct short)

                                                                   Noise floor under .01 mVAC

                                                                   LED lights at regulator drop out.