Famous for its flexibility, the affordable C 1000 S condenser
                         microphone is ready for any assignment on stage or in the
                         studio. Sometimes you have phantom power, sometimes you
                         don't. Sometimes you need a cardioid pattern, other times
                         greater directivity can help you minimize leakage or control
                         feedback. Of course, you always need high sensitivity, high SPL
                         handling with low distortion, and extended frequency response.
                         That¹s why thousands of sound professionals rely on the C
                         1000 S as their "do-it-all" microphone. 

                         Included PPC 1000 polar pattern converter allows quick
                         changeover from cardioid to hypercardioid when a more
                         directional pickup pattern is required, and powering is by
                         internal 9 V battery or external phantom supply. Silent on/off
                         switch is recessed to prevent inadvertent shutoff. The also
                         included and attachable Presence Boost Adapter piece PB
                         1000 creates an emphasis of the higher frequencies around 5
                         to 9 kHz by about 3 to 5 dB, which not only improves the
                         transmission of sibilances but may be also advantageous
                         when recording instruments with a larger high frequency
                         content in their audio spectrum. Rugged construction qualifies
                         the C 1000 S for demanding road work, yet pristine condenser
                         response and very low noise make it an excellent choice for
                         recording in home/project studios. Stand adapter, foam
                         windscreen, and case included.
 

Polar pattern: cardioid, hypercardioid (with PPC 1000 attached) 
   Frequency range: 50­20,000 Hz 
   Sensitivity: 6 mV/Pa (-44.4 dBV re 1 V/Pa) Max. SPL for 1 % 
   THD: 137 dB SPL 
   Equivalent noise level: 21 dB-A 
   Signal/noise ratio (A-weighted): 73 dB-A 
   Preattenuation pad: - 
   Bass cut filter: - 
   Electrical impedance: 200 ohm 
   Recommended load impedance: „2,000 ohm 
   Power requirement: 9 to 52 volts (acc. to DIN 45596) or internal 9 V battery 
   Current consumption: approx. 2 mA 
   Connector: 3-pin male XLR 
   Cable length: - 
   Finish: satin silver enamel 
   Size: length: 220 mm (8.6 in.); max. dia.: 34 mm (1.3 in.) 
   Net/shipping weight: 320/653 g (11.3 oz./2.1 lb.) 
   Standard accessories: W 1000 foam windscreen; SA 43 stand adapter; PPC 1000 Polar Pattern
   Converter; PB 1000 Presence Boost Adapter; zippered carrying bag 
   Optional accessories: power supplies: N 62, N 66; cables: MK 9/10 with XLR connector, 
10 m (30 ft.), B
   18, PF 100